Skip to content Skip to sidebar Skip to footer

Feed the Beast Beyond Mac Osx 102

Printing Photos

Note:

Using EPSON Easy Photo Print included on the CD-ROM is the easiest and quickest way to create various photos, such as borderless photos or photos with borders or frames. EPSON Easy Photo Print also helps you enhance your photos.
See Starting EPSON Easy Photo Print

When you print a borderless photo, part of the image will be cropped off because this option enlarges the image slightly beyond the paper size. You need to adjust the image file to the size of the paper. If your application has margin settings, make sure they are set to zero before printing.

For instructions on roll paper printing, see the following section.
See Printing on Roll Paper

Paper compatible with borderless printing

If you want to print borderless photos, refer to the table below because borderless printing is not available for all types of paper.

Epson Glossy Photo Paper

A4, 13 × 18 cm (5 × 7 in.), 10 × 15 cm (4 × 6 in.)

Epson Matte Paper - Heavyweight

A3+, A3, A4

Epson Enhanced Matte Paper

A3+, A3, A4

Epson Premium Glossy Photo Paper

A3+, A3, A4, 13 × 18 cm (5 × 7 in.), 16:9 wide size (102 × 181 mm), 10 × 15 cm (4 × 6 in.), 32.9 cm × 10 m (Roll paper)

Epson Premium Semigloss Photo Paper

A3+, A3, A4, 10 × 15 cm (4 × 6 in.), 32.9 cm × 10 m (Roll paper)

Epson Watercolor Paper - Radiant White

A3+

Epson Velvet Fine Art Paper

A3+

Note:

Borderless printing takes longer than normal printing.

Print quality may decline in the top and bottom areas of the printout, or the area may be smeared when printing on papers other than those listed above. Print a single sheet to check the quality before printing large jobs.

Loading paper

Refer to the section below for details on loading paper.

When using special Epson paper, refer to the section below.

Using Gloss Optimizer

This printer uses Gloss Optimizer with the photo paper to improve the glossiness of photographs. However, its effectiveness will depend on the data or the paper you use. If Gloss Optimizer is not effective, Epson recommends you to disable the Gloss Optimizer setting in the printer driver by either of the following ways;

Windows
Click the Main tab in the printer driver, then clear the Gloss check box.

Mac OS X
Click Print from your application's File menu, choose Print Settings in the Print window that is displayed, then select Off for Gloss Optimizer, which becomes available when you select the Advanced mode under Print Settings.

Note:

Printing will not be possible if the Gloss Optimizer cartridge has expended even when Gloss Optimizer is disabled. Before printing, replace the expended cartridge.
See Replacing an Expended Ink Cartridge

Printer settings for Windows

Follow these steps to adjust your printer settings.

Access the printer settings.

Click the Main tab, then select one of the following Quality Option settings:

Photo for good quality and speed

Best Photo for the best print quality

Select Sheet as the Source setting when feeding paper into the sheet feeder. Select Manual - Roll as the Source setting when feeding paper into the rear manual feed slot.

Select the appropriate Type setting.

Select Borderless if you want to print borderless photos.

You can adjust the amount of the image that extends beyond the edges of the paper by using the Borderless Expansion slider on the Page Layout window.

Select the appropriate Size setting.

Select Portrait (tall) or Landscape (wide) to change the orientation of your printout.

Click OK to close the printer settings window.

After completing the steps above, print one test copy and examine the results before printing an entire job.

Printer settings for Mac OS X

Follow these steps to adjust your printer settings.

Access the Page Setup dialog box.

Select the printer you are using as the Format for setting.

Select the appropriate Paper Size setting.

Note:

Select XXX (Sheet Feeder - Borderless) if you want to print borderless photos.

Select the appropriate Orientation settings.

Click OK to close the Page Setup dialog box.

Access the Print dialog box.

Select the printer you are using as the Printer setting. Then make the Copies & Pages settings.

Select Print Settings from the pop-up menu.

Select the appropriate Media Type, Color, and Mode settings. See online help for details of Print Settings.

After completing the steps above, print one test copy and examine the results before printing an entire job.

Note:

You can control the amount of the image that extends beyond the edges of the paper during borderless printing. See online help for details.

arcandshouthat1978.blogspot.com

Source: https://epson.ru/es/upload/ManualTypes/100518/html/basic_2.htm

Post a Comment for "Feed the Beast Beyond Mac Osx 102"